Installation guides

SafarTrak installation guides

Everything a technician needs to fit a SafarTrak tracker properly: wire colours, wiring, where to mount it, what the LEDs mean, full specifications and fixes for common problems.

Choose your device

SafarTrak ST100 wired GPS tracker
SafarTrak ST100

Wired 4G GPS tracker with Bluetooth. Compact wired tracker for trucks, buses, vans and cars. It runs on 9 to 90 V DC, has internal GPS and cellular antennas, a backup battery, ignition and digital inputs, an analog input, a CAN channel, 1-Wire and Bluetooth.

Open ST100 guides

Fitting a tracker from another brand on the SafarTrak platform? See the compatible devices list, then follow that maker's wiring guide.

How an installation goes

  1. Check the vehicle

    Test every electrical function before you start and note any existing faults.

  2. Prepare the tracker

    Insert an activated Nano-SIM and check the backup battery plug.

  3. Pick the spot and wire it

    Hidden, sky view, little metal, LED side up. Ground, then power through a 2 A fuse, then ignition.

  4. Mount and tidy

    Tape and tie the tracker down, secure the wires, refit panels.

  5. Verify and hand over

    Confirm GPS fix, data, voltage and ignition in the installer console, then assign the vehicle to the customer.

Installer console

SafarTrak technicians commission each tracker in the installer console: scan the IMEI, run the live signal checks (SIM, server, GPS, power and ignition, plus CAN and temperature on reefer vehicles), then assign it to the customer's vehicle and share the commissioning certificate.

Open the installer console. Accounts are issued by SafarTrak operations.

Before you touch wiring

Stuck on site? Email support@safartrak.com or WhatsApp +91 95988 89988 (24/7) with the IMEI and a photo of the LEDs, or contact the team.