ST100
ST100 wired GPS tracker
Compact wired tracker for trucks, buses, vans and cars. It runs on 9 to 90 V DC, has internal GPS and cellular antennas, a backup battery, ignition and digital inputs, an analog input, a CAN channel, 1-Wire and Bluetooth.
About the ST100

- Supply: 9 to 90 V DC, so it fits 12 V and 24 V vehicles.
- Antennas: GPS, cellular and Bluetooth all internal.
- Backup battery: 180 mAh, keeps reporting if power is cut.
- Size: 83.5 × 48.5 × 13.5 mm, about 73 g.
- Inputs: ignition, 1 digital, 1 analog (fuel), CAN, 1-Wire, Bluetooth sensors.
Buying or comparing? See the ST100 product page.
Guides
Harness at a glance
| Pin | Wire | Signal | Use |
|---|---|---|---|
| 1 | Red | VBAT | Power supply, 9 to 90 V DC (permanent +12 V / +24 V) |
| 2 | Black | GND | Ground (vehicle chassis) |
| 3 | Green | DIN (IGN) | Ignition input |
| 4 | Brown | DIN-1 | Digital input 1 (door, PTO, panic button and similar) |
| 5 | Yellow | CAN-H | CAN bus high |
| 6 | White | CAN-L | CAN bus low |
| 7 | Pink | 1-Wire D | 1-Wire data (temperature sensor or iButton driver ID) |
| 8 | Orange | 1-Wire P | 1-Wire power |
| 9 | Blue | AIN / DIN | Analog input (fuel level sensor), or a second digital input |
Stuck on site? Email support@safartrak.com or WhatsApp +91 95988 89988 (24/7) with the IMEI and a photo of the LEDs, or contact the team.