SafarTrak ST200 specifications
Tech Specs
Key Capabilities
Plug-and-Play OBD-IIConnects directly to the standard OBD-II diagnostic port, with no wiring harness or installer visit required
CAN Vehicle DataOne CAN channel supports access to available vehicle diagnostic data through the OBD-II connection
Driver & Movement DetectionBuilt-in accelerometer supports driver behaviour, orientation, acceleration and vehicle-movement detection
Up to 8-Hour BackupBuilt-in 300 mAh battery supports up to eight hours of backup operation, depending on configuration and battery ageing
Historical Data BufferingStores up to 6,000 records onboard for historical-data buffering, review and analysis
How ST200 Works
Standard OBD-II PortST200 connects directly to the vehicle’s standard OBD-II diagnostic port.
ST200 DeviceThe device receives power through the OBD-II port and requires no separate wiring harness or installer visit.
Tracking and Vehicle DataST200 combines GNSS-based vehicle tracking, accelerometer information and available CAN vehicle diagnostic data.
Fleet PlatformThe device communicates through 2G cellular technology using TCP/IP and SMS, with remote configuration and firmware-update support.
Vehicle Data and CAN
Vehicle ConnectorStandard OBD-II port
InstallationDirect plug-in connection
Wiring RequirementNo wiring harness required
CAN Interface1 channel
Documented CAN UseAvailable for vehicle diagnostic data
Driver and Movement Intelligence
Movement SensorBuilt-in accelerometer
Driver BehaviourGeneral driver-behaviour functionality using accelerometer-derived information
Movement DetectionVehicle-movement detection through the onboard accelerometer
OrientationOrientation detection
AccelerationAcceleration-related movement detection
Power and Backup
Power SourceVehicle OBD-II port
Input Voltage9-32 VDC
Internal Battery300 mAh
Backup DurationUp to 8 hours
Sleep-Mode Current<10 mA
Sleep BehaviourConfigurable after vehicle ignition is off
Historical Data Buffering
Internal Memory16 Mbit internal flash
Record CapacityUp to 6,000 records
Documented UseHistorical-data buffering for review and analysis of driver behaviour, vehicle movement and diagnostic data
GNSS and Positioning
Satellite SystemsGNSS and GLONASS
GNSS AntennaInternal
Cellular Connectivity
Cellular Network2G GSM
Frequency BandsQuad-band 850/900/1800/1900 MHz
Communication InterfaceTCP/IP and SMS
SIM Type4FF Nano-SIM, plastic SIM card
Cellular AntennaInternal
Device Management
OTA/FOTASupported
Remote Update ChannelMaintenance server
Update FunctionsConfiguration and firmware updates
Configuration ChannelsSMS, TCP/IP and Bluetooth
SMS ConfigurationParameter configuration supported
Bluetooth VersionBluetooth Classic 3.0
Physical and Environmental
Dimensions 72 x 53 x 30 mm
Weight 88g
Operating Temperature-25°C to +85°C, without battery
Storage Temperature-40°C to +85°C, without battery
Certification Status and Warranty
Certification documentationContact our team for the certificate, model and validity information for your selected device.
WarrantyStandard manufacturer 12-month limited warranty from the date of purchase
Warranty CoverageManufacturing defects
Warranty HolderOriginal consumer
TransferabilityNon-transferable
General
Device NameST200
Hardware Specification ReferenceOBD II
CategoryPlug-and-play GPS/GSM/GNSS vehicle-tracking unit, OBD-II port mounted
InstallationDirect plug-in to standard OBD-II diagnostic port
Wiring RequirementNo wiring harness required
Installer RequirementNo installer visit required
Core TechnologiesGSM 2G, GNSS and Bluetooth
GNSS
Satellite SystemsGNSS and GLONASS
AntennaInternal
Cellular and Communication
Cellular Network2G GSM
Frequency BandsQuad-band 850/900/1800/1900 MHz
Communication InterfaceTCP/IP and SMS
SIM Type4FF Nano-SIM, plastic SIM card
Cellular AntennaInternal
Short-Range WirelessBluetooth Classic 3.0
Bluetooth AntennaInternal
Power
Power SourceVehicle OBD-II port
Input Voltage9-32 VDC
Internal Battery300 mAh
Backup DurationUp to 8 hours; may vary based on configuration and battery ageing
Sleep-Mode Current<10 mA
Sleep ConfigurationConfigurable once vehicle ignition is off
Vehicle Interface, Sensors and Indicators
Vehicle ConnectorStandard OBD-II port
CAN Interface1 channel
Documented CAN UseAvailable for vehicle diagnostic data
Movement SensorAccelerometer
Sensor FunctionsDriver behaviour, orientation, acceleration and movement detection
LED Indicators4: GNSS, process, cellular and power
Memory and Data Buffering
Internal Memory16 Mbit internal flash
Record CapacityUp to 6,000 records
Documented Storage UseHistorical-data buffering for review and analysis
Device Management
OTA/FOTASupported
Update FunctionsConfiguration and firmware updates
Remote Update ChannelMaintenance server
Configuration ChannelsSMS, TCP/IP and Bluetooth
SMS ConfigurationParameter configuration supported
Physical, Environmental, Certification and Warranty
Dimensions72 x 53 x 30 mm
Weight 88g
Operating Temperature -25°C to +85°C, without battery
Storage Temperature-40°C to +85°C, without battery
WarrantyStandard manufacturer 12-month limited warranty covering manufacturing defects for the original consumer; non-transferable
See SafarTrak at work
Show us the fleet problemyou want to solve.
Bring a question from your working day. We’ll show you the relevant screens and check what your vehicles and devices can report.
Talk to the SafarTrak team